Drive, Superdrive, 2x, With Bezel, For Mac
As a rule with iFixit repairs, for years I've been printing the guides, applying scotch magic tape near each picture (which allows me to reutilise the paper prints in the future), neatly putting the appropriate screw next to their picture and taping them down with scotch magic tape. Even if I have to wait for spare parts, this allows me to neatly file the guide + screws in a copy safe and a binder (or in a cardboard filing box together with the rest of the parts) for later reassembly. Minecraft capes download.
Hardly any mistake possible. I didn't realize these comments were HERE? Poor web design if you can't see comments in an obvious way. Step 10 will cause you the most trouble in reassembling the computer and I knew it as soon as I popped that connector out off the board. Its really f.cking hard to get that connector hooked back up in the way it should be and I have small hands.
Drive Superdrive 2x With Bezel For Macbook
I managed to get it at least partly pushed in after several tries. Over all it took over half an hour to get it back in there right and scared the!@#$ out of me because I didn't think I could get it done.
Drive Superdrive 2x With Bezel For Mac 2
Those stupid little plastic things won't help you here, the connector really needs to be pushed hard to get it back in. I ended up using a big beefy screw driver for slotted screws, about a ten inch long screwdriver. I used the blade on each end of the connector and was able to give it a good hard push on one end, then pushed on the other end, slowly rocking the connector back into full flush contact. Be real careful you aren't pushing on the ribbon at all.